Template:Infobox airport/doc

Usage

The following blank template includes all of the available parameter names, except for repeating names used for runways and statistics. All parameters except name are optional; however, "IATA: none – ICAO: none", along with the heading "Summary", will always appear. Any unused parameters should be omitted, but can also be left blank if preferred. The use of flag icons with this infobox is discouraged.

{{Infobox airport | name = | ensign = | ensign_size = | ensign_alt = | nativename = | nativename-a = | nativename-r = | image = | image_size = <!-- if less than 220 --> | image_alt = | caption = | image2 = | image2_size = <!-- if less than 220 --> | image2_alt = | caption2 = | IATA = | ICAO = | FAA = | TC = | LID = | GPS = | WMO = | type = | owner-oper = | owner = | operator = | city-served = | location = | opened = <!-- {{start date|YYYY|MM|DD}} --> | closed = <!-- {{end date|YYYY|MM|DD}} --> | passenger_services_ceased = <!-- {{end date|YYYY|MM|DD}} --> | hub = <!-- If more than one airline, use {{Unbulleted list|Airline1|Airline2}} --> | focus_city = <!-- If more than one airline, use {{Unbulleted list|Airline1|Airline2}} --> | operating_base = <!-- If more than one airline, use {{Unbulleted list|Airline1|Airline2}} --> | built = <!-- military airports --> | used = <!-- military airports --> | commander = <!-- military airports --> | occupants = <!-- military airports --> | timezone = | utc = | summer = | utcs = | elevation-f = | elevation-m = | metric-elev = | coordinates = <!-- {{coord}} --> | website = <!-- {{URL|example.com}} --> | image_map = | image_mapsize = | image_map_alt = | image_map_caption = | mapframe = | pushpin_map = | pushpin_mapsize = | pushpin_map_alt = | pushpin_map_caption = | pushpin_relief = | pushpin_image = | pushpin_label = | pushpin_label_position = | pushpin_mark = | pushpin_marksize = | r1-number = | r1-length-f = | r1-length-m = | r1-surface = <!-- up to r12 --> | metric-rwy = | h1-number = | h1-length-f = | h1-length-m = | h1-surface = <!-- up to h12 --> | stat1-header = | stat1-data = <!-- up to stat8 --> | stat-year = | footnotes = }}

Parameters

All parameters except name are optional.

Airport name

These parameters specify the airport name which is displayed at the top of the infobox.

name

The name of the airport in English, such as Warsaw Chopin Airport or Beijing Capital International Airport.

nativename

Airport name in a native language using Western characters (French, German, Spanish, etc.), such as Lotnisko Chopina w Warszawie. In such cases the native name should be in italics, see Wikipedia:Manual of Style/Text formatting#Foreign terms. Can also be used for two different names in the same language (see Region of Waterloo International Airport).

nativename-a

Airport name in a native language with non-Western characters (Chinese, Japanese, Korean, Arabic, etc.), such as 北京首都国际机场.

nativename-r

Use in conjunction with above for Romanized name of the airport, such as Běijīng Shǒudū Guójì Jīcháng. In such cases the Romanized name should be in italics, see Wikipedia:Manual of Style/Text formatting#Foreign terms.

Airport image

These parameters specify an airport photograph or logo which is displayed below the title. A second image can also be displayed below the first image by using the parameter names ending with a "2".

ensign

Optional small ensign

image / image2

The name of image file, such as Airport.png or Logo.gif (do not include the File: or Image: prefix).

image_alt / image2_alt

Alternative text for the images.

image_size / image2_size

image-width / image2-width

The image size or width in pixels, i.e., 175 (defaults to 220 if not specified).

May be used for smaller images which would appear distorted when expanded to a width of 220px.

caption / caption2

Text displayed beneath the image. If left blank or omitted, a caption will not be displayed.

This should only be used for photographs that require an explanation; it should be omitted for airport logos and may be omitted for photographs.

Airport codes

These parameters specify airport location identifiers which are displayed below the image (or below title if there is no image):

IATA

The airport's three character IATA location identifier. If omitted or left blank it will display as IATA: none.

ICAO

The airport's four character ICAO location identifier. If omitted or left blank it will display as ICAO: none.

FAA

The three or four character FAA location identifier for airports in the United States. If omitted or left blank, nothing is displayed.

TC

The three or four character Transport Canada location identifier for airports in Canada. If omitted or left blank, nothing is displayed.

LID

A location identifier for airports outside the US or Canada, if other than ICAO or IATA codes. If omitted or left blank, nothing is displayed.

GPS

A Global Positioning System code for the airport, if other than ICAO or IATA codes. If omitted or left blank, nothing is displayed.

WMO

The World Meteorological Organization five digit code for the weather station at the airport. If omitted or left blank, nothing is displayed.

Airport summary

These parameters specify airport details for the "Summary" section displayed below the airport codes.

type

Airport type should be one of the following: Public, Private, Military or Military/Public. Do not use Commercial, General or Civil.

owner-oper

If the airport is owned and operated by the same entity, use this in place of owner and operator.

owner

Name of the airport owner.

operator

Name of the airport operator, if not the owner.

city-served

If the airport is associated with a major city but actually located in a smaller town, list the major city here and the smaller town under location. This is not automatically linked, in order to allow multiple links if needed.

Example: city-served = Paris

Result: Paris

location

Name of the town or city where the airport is located. Do not put the airport's street address in this field. This is not automatically linked, in order to allow multiple links if needed.

Example: location = [[Orly]], France

Result: Orly, France

opened

The date when the airport originally opened for commercial service.

Example: {{start date|1989|09|22}}

Result: September 22, 1989

closed

The date when the airport closed, either temporarily or permanently, along with reason for closing (for presently closed airports only). Use {{end date}}.

passenger_services_ceased

The date when passenger services to the airport ceased due to conversion of the airport for another use, along with the new use for the airport. Only for airports that previously had passenger services. Use {{end date}}.

hub

If the airport serves as a hub, list the airlines here in alphabetical order. This is not automatically linked, in order to allow multiple links if needed. Use {{Unbulleted list}} if the list is long.

Example:

{{Unbulleted list | [[British Airways]] | [[EasyJet]] | [[Virgin Atlantic]] }}

Result:

British Airways

EasyJet

Virgin Atlantic

focus_city

If the airport serves as a focus city, list the airlines here in alphabetical order. See discussion at Wikipedia talk:WikiProject Airports#Focus Cities on pages. Use {{Unbulleted list}} if the list is long.

operating_base

If the airport serves as an operating base for an airline, list it here in alphabetical order, unless the airline is already listed under hub or focus_city. This parameter is most commonly used for Ultra-low cost airlines which do not have hubs or focus cities. Use {{Unbulleted list}} if the list is long.

timezone and utc

Will give the time zone that the airport is in, can be linked. A list can be found at List of time zones by country.

Timezone is optional, but if it is used, then utc must be used as well, can be linked. A list can be found at List of UTC time offsets.

summer and utcs

If the time zone observes daylight saving time this will give the zone that the airport is in, can be linked. A list can be found at List of time zones by country.

Summer is optional, but if it is used, then utcs must be used as well, can be linked. A list can be found at List of UTC time offsets.

elevation-f

Height above mean sea level, in feet.

elevation-m

Height above mean sea level, in metres.

website

External link to the airport's official website. See Wikipedia: External links#How to link for more information.

Example: website = {{URL|http://www.dfwairport.com/}}

Result: www.dfwairport.com

Military airports

These optional parameters provide additional information for military airports. The parameter names are based on those used in Template:Infobox military structure. This allows the display of information from that template, without the need to include an additional infobox. See example 4 below.

built

The date when the structure was built, usually given in years.

used

The period during which the structure was in active military use, usually given in years.

commander

The current commanding officer, for structures currently in military use.

occupants

Any notable military units which occupy the structure.

Geographic coordinates

This template allows for the insertion of geographic coordinates in two different ways: you can either provide a complete {{Coord}} template in the coordinates parameter, or you can provide the individual coordinate components (degrees, minutes, seconds, etc.) in the separate parameters described below. The latter method also allows you to insert a pushpin map with an automatically-placed airport icon and label (see below).

If you use both methods, then the coordinates parameter will be used in the infobox.

coordinates

Latitude and Longitude of airport, specified using the {{Coord}} template. When entering the coordinates always ensure that the resultant map or image shows the airport. It is very easy to confuse "N" for "S" or "E" for "W". If used as shown below, this will also cause the airport to appear in Google Earth's Geographic Web Layer.

Example: coordinates = {{Coord|49|27|16|N|002|06|46|E|type:airport_region:FR|display=inline,title}}

Result: 49°27′16″N 002°06′46″E

Maps

This template provides three ways to include a map: as a simple image, or using interactive Mapframe maps, or using {{Location map}} (with the coordinate parameters described above to automatically place a pushpin mark and label on a map).

Image map

Am image map can be displayed by providing a value for image_map. The remaining image_ parameters are optional.

image_map

The name of an image to use as a map, such as Airport_map.png (do not include the File: or Image: prefix).

image_mapsize

(optional) The width to display the image map, in pixels. Just the number, no "px". If omitted or left empty, defaults to 220.

image_map_alt

(optional) Alt text for the image map. If left blank or omitted, this defaults to same text used in image_map_caption (or Location of {{{name}}} if no caption).

image_map_caption

(optional) Caption to display below the image map. If left blank or omitted, a caption will not be displayed.

Mapframe maps

• Basic parameters:
  • mapframe – Specify yes or no to show or hide the map, overriding the default. Default: no
  • mapframe-caption – Caption for the map. Default: blank (or if |mapframe-geomask= is set, "Location in geomask's label")
  • mapframe-custom – Use a custom map instead of the automatic mapframe. Specify either a {{maplink}} template, or another template that generates a mapframe map, or an image name. If used, the subsequent mapframe parameters will be ignored. Default: not specified
  • mapframe-id or id or qid – Id (Q-number) of Wikidata item to use. Default: item for current page
  • mapframe-coordinates or mapframe-coord or coordinates or coord – Coordinates to use, instead of any on Wikidata. Use the {{Coord}} template, e.g. |coord={{Coord|12.34|N|56.78|E}}. Default: coordinates from Wikidata
  • mapframe-wikidata – Set to yes to show shape/line features from the wikidata item, if any, when |coord= is set. Default: not specified
• Customise which features are displayed:
  • mapframe-shape – Turn off display of shape feature by setting to none. Use an inverse shape (geomask) instead of a regular shape by setting to inverse. Default: not specified
  • mapframe-point – Turn off display of point feature by setting to none. Force point marker to be displayed by setting to on. Default: not specified
  • mapframe-line – Turn off display of line feature by setting to none. Default: not specified
  • mapframe-geomask – Wikidata item to use as a geomask (everything outside the boundary is shaded darker). Can either be a specific Wikidata item (Q-number), or a property that specifies the item to use (e.g. P17 for (P17), P131 for (P131)). Default: airport
  • mapframe-switcher – set to auto or geomasks or zooms to enable Template:Switcher-style switching between multiple mapframes. Default: not specified
    • auto – switch geomasks found in (P276) and (P131) statements on the page's Wikidata item, searching recursively. E.g. an item's city, that city's state, and that state's country.
    • geomasks – switch between the geomasks specified as a comma-separated list of Wikidata items (Q-numbers) in the mapframe-geomask parameter
    • zooms – switch between "zoomed in"/"zoomed midway"/"zoomed out", where "zoomed in" is the default zoom (with a minimum of 3), "zoomed out" is 1, and "zoomed midway" is the average
• Other optional parameters:
  • mapframe-frame-width or mapframe-width – Frame width. Default: 270
  • mapframe-frame-height or mapframe-height – Frame height. Default: 200
  • mapframe-shape-fill – Color used to fill shape features. Default: #606060
  • mapframe-shape-fill-opacity – Opacity level of shape fill, a number between 0 and 1. Default: 0.5
  • mapframe-stroke-color or mapframe-stroke-colour – Color of line features, and outlines of shape features. Default: #ff0000
  • mapframe-stroke-width – Width of line features, and outlines of shape features; default is "5". Default: 5
  • mapframe-marker – Marker symbol to use for coordinates; see mw:Help:Extension:Kartographer/Icons for options. Default: airport
    • Can also be set to blank to override any default marker symbol
  • mapframe-marker-color or mapframe-marker-colour – Background color for the marker. Default: #5E74F3
  • mapframe-geomask-stroke-color or mapframe-geomask-stroke-colour – Color of outline of geomask shape. Default: #555555
  • mapframe-geomask-stroke-width – Width of outline of geomask shape. Default: 2
  • mapframe-geomask-fill – Color used to fill outside geomask features. Default: #606060
  • mapframe-geomask-fill-opacity – Opacity level of fill outside geomask features, a number between 0 and 1. Default: 0.5
  • mapframe-zoom – Set the zoom level, from "1" (map of earth) to "18" (maximum zoom in), to be used if the zoom level cannot be determined automatically from object length or area. Default: 10
  • mapframe-length_km or mapframe-length_mi or mapframe-area_km2 or mapframe-area_mi2 – Determine zoom level by passing in object's length (in kilometres or miles) or area (in square kilometres or square miles). Default: not specified
  • mapframe-frame-coordinates or mapframe-frame-coord – Alternate latitude and longitude coordinates for initial placement of map, using {{coord}}. Default: derived from item coordinates

Location/pushpin map

A location map can be displayed by providing values for coordinates, and pushpin_map. The remaining pushpin_ parameters are optional.

pushpin_map

The name of a location map as per Template:Location map (e.g. Indonesia or Russia). The |coordinates= parameter values position a pushpin mark and label on the map automatically.

pushpin_mapsize

(optional) The width to display the pushpin map, in pixels. Just the number, without "px". If omitted or left empty, defaults to 220.

pushpin_map_alt

(optional) Alt text for the pushpin map.

pushpin_map_caption

(optional) Caption to display below the pushpin map. If left blank or omitted, a caption will not be displayed.

pushpin_relief

(optional) Any non-blank value (yes, 1, etc.) will cause the template to display a relief map image, where available (see example 1). For additional information, see Template:Location map#Relief parameter.

pushpin_image

(optional) Name of an alternative map image, which must have the same edge coordinates as the location map template specified via pushpin_map (see example 5). Do not include the File: or Image: prefix. For additional information, see Template:Location map#AlternativeMap parameter.

pushpin_label

(optional) The text of the label to place next to the pushpin mark (see example 1). The default is the value of the name parameter.

pushpin_label_position

(optional) The position of the label on the pushpin map relative to the pushpin mark (see example 5). Valid values are left, right, top and bottom. This defaults to either left or right, depending on the coordinates of the marker and its position relative to the right border of the map image.

pushpin_mark

(optional) The name of an image to display as the pushpin mark (see example 5). The default is File:Airplane silhouette.svg ( File:Airplane silhouette.svg ).

pushpin_marksize

(optional) The size of the mark in pixels (see example 5). The default is 10. Do not include px, for example: pushpin_marksize = 8, not pushpin_marksize = 8px.

Infobox control

These parameters control how certain fields within the infobox are displayed.

metric-elev

Set to any value to display elevation in metric units (metres) before imperial/US units (feet); leave blank to display imperial/US units first. This can be seen in example 1.

metric-rwy

Set to any value to display runway length in metric units (metres) before imperial/US units (feet); leave blank to display imperial/US units first. Examples 1 and 2 below show the runway length with metres first; example 3 and 4 show it with feet before metres.

Runways

These parameters specify details for each runway in the "Runways" section displayed below the summary. This can also be used to specify water landing areas for seaplanes (see Fairbanks International Airport). Parameters start with r1- for the first runway, r2- for the second runway, up to r8- for the eighth runway (if more are needed, leave a message on the talk page). Each airport should have at least one runway.

r_n-number (r1-number, r2-number, ...)

The designation of the runway, normally two numbers like this → 02/20, 1st number is 18 lower than the 2nd. Where there are parallel runways an additional letter is added to each number, for example "L" for left, "R" for right and "C" for center. In certain cases a runway will only have one number when it can only be used in one direction. For airports in the United States the leading zero is not used and the designation should read 2/20.

r_n-length-f (r1-length-f, r2-length-f, ...)

Runway length in feet.

r_n-length-m (r1-length-m, r2-length-m, ...)

Runway length in metres.

r_n-surface (r1-surface, r2-surface, ...)

Runway surface type, such as: Concrete, Asphalt, Gravel, Grass (or Turf), Dirt, Water, etc. Avoid the generic type "Paved" if possible.

Helipads

These parameters specify details for each helipad in the "Helipads" section displayed below the runways. Parameters start with h1- for the first helipad, h2- for the second helipad, up to h12- for the twelfth helipad (if more are needed, leave a message on the talk page). This section is optional and only appears if the h1- parameters are specified. See example 1 and example 3 below.

h_n-number(h1-number, h2-number, ...)

The designation of the helipad. In the United States this is usually the letter "H" followed by a number, i.e. "H1", "H2", etc.

h_n-length-f (h1-length-f, h2-length-f, ...)

Helipad length in feet.

h_n-length-m (h1-length-m, h2-length-m, ...)

Helipad length in metres.

h_n-surface (h1-surface, h2-surface, ...)

Helipad surface type, such as: Concrete, Asphalt, etc. Avoid the generic type "Paved" if possible.

Statistics

These parameters specify details for an optional "Statistics" section displayed below the runways and helipads. Parameters start with stat1- for the first statistic, stat2- for the second statistic, etc. This section only appears if the stat1- parameters are specified. See example 1 and example 3 below.

stat_n-header (stat1-header, stat2-header, ...)

A brief description of each statistic, such as Passengers or Aircraft operations.

stat_n-data (stat1-data, stat2-data, ...)

The data associated with the corresponding header.

stat-year

The calendar year for the statistics. This is displayed in parentheses after the word "Statistics" in the section header.

Footnotes

This parameter contains text for footnotes displayed at the bottom of the infobox.

footnotes

The most common use for this field is to give sources or references for the data displayed in the infobox. See the examples below.

Examples

Example 1

IATA: WAW ICAO: EPWA
Summary
Airport type	Public / Military
Operator	Polish Airports State Enterprise (PPL)
Serves	Warsaw
Location	Warsaw (Okęcie), Poland
Opened	29 April 1934 (1934-04-29)
Hub for	Bingo Airways Enter Air Eurolot LOT Polish Airlines Small Planet Airlines SprintAir Wizz Air
Elevation AMSL	110 m / 362 ft
Coordinates	52°09′57″N 20°58′02″E
Website	www.lotnisko-chopina.pl
Map
WAW is located in Poland WAW WAW Location of airport in Poland
Runways
Direction Length Surface m ft 11/29 2,800 9,186 Asphalt 15/33 3,689 12,106 Asphalt
Helipads
Number Length Surface m ft H1 40 131 Concrete
Statistics (2012)
Passengers 9,587,842 Movements 118,320
Statistics: Warsaw Chopin Airport Sources: Polish AIP at Eurocontrol

Warsaw Chopin Airport

This example shows the appearance of the infobox without an image.

It also shows the use of the parameters for latitude, longitude, and location/pushpin map.

Note: helipad information added to illustrate function of metric-rwy parameter.

{{Infobox airport
| name         = Warsaw Chopin Airport
| nativename   = ''Lotnisko Chopina w Warszawie''
| nativename-r = Warszawa/Okęcie Airport
| image        = <!--leave blank, this is demo without image-->
| IATA         = WAW
| ICAO         = EPWA
| type         = Public / Military
| operator     = Polish Airports State Enterprise (PPL)
| city-served  = [[Warsaw]]
| location     = [[Warsaw]] ([[Okęcie]]), Poland
| hub          = 
{{plainlist|
*[[Bingo Airways]]
*[[Enter Air]]
*[[Eurolot]]
*[[LOT Polish Airlines]]
*[[Small Planet Airlines]]
*[[SprintAir]]
*[[Wizz Air]]
}}
| metric-elev  = yes
| elevation-m  = 110
| elevation-f  = 362
| website      = {{URL|1=http://www.lotnisko-chopina.pl/en/passenger|2=www.lotnisko-chopina.pl}}
| opened       = {{Start date|1934|04|29|df=yes}}
| coordinates  = {{coord|52|09|57|N|20|58|02|E|display=inline<!--- set here to prevent coordinates from appearing in the title of the template page --->}}
| pushpin_map            = Poland
| pushpin_map_caption    = Location of airport in Poland
| pushpin_relief         = yes
| pushpin_label          = WAW
| metric-rwy   = yes
| r1-number    = 11/29
| r1-length-m  = 2,800
| r1-length-f  = 9,186
| r1-surface   = [[Bitumen|Asphalt]]
| r2-number    = 15/33
| r2-length-f  = 12,106
| r2-length-m  = 3,689
| r2-surface   = Asphalt
| h1-number    = H1
| h1-length-m  = 40
| h1-length-f  = 131
| h1-surface   = [[Concrete]]
| stat-year = 2012
| stat1-header = Passengers
| stat1-data = 9,587,842
| stat2-header = Movements
| stat2-data = 118,320
| footnotes    = Statistics: Warsaw Chopin Airport<ref name="stats2013">{{cite web|title=About the Airport: Statistics|url=http://www.lotnisko-chopina.pl/en/airport/about-the-airport/statistics|publisher=Warsaw Chopin Airport|accessdate=28 September 2013}}</ref><br/>Sources: Polish [[Aeronautical Information Publication|AIP]] at [[Eurocontrol]]<ref>{{cite web|url=http://www.ead.eurocontrol.int/publicuser/protect/pu/main.jsp |title=EAD Basic |publisher=Ead.eurocontrol.int |accessdate=2012-06-28}}</ref>
}}

Example 2

File:Beijing Capital Departure Hall.jpg Beijing Capital Departure Hall
IATA: PEK ICAO: ZBAA
Summary
Airport type	Public
Operator	Civil Aviation Administration of China
Serves	Beijing
Location	Chaoyang District, Beijing
Opened	March 2, 1958 (1958-03-02)
Hub for	Air China, China Southern Airlines
Elevation AMSL	116 ft / 35 m
Coordinates	40°04′48″N 116°35′04″E
Website	www.bcia.com.cn
Runways
Direction Length Surface m ft 18L/36R 3,800 12,467 Asphalt 18R/36L 3,200 10,499 Asphalt

Beijing Capital International Airport

This example shows the appearance of the infobox with an image and a caption.

It also uses both the nativename-a and nativename-r parameters.

{{Infobox airport
| name         = Beijing Capital International Airport
| nativename-a = 北京首都国际机场
| nativename-r = Běijīng Shǒudū Guójì Jīcháng
| image        = Beijing Capital Departure Hall.jpg
| caption      = Beijing Capital Departure Hall
| IATA         = PEK
| ICAO         = ZBAA
| type         = Public
| operator     = [[Civil Aviation Administration of China]]
| city-served  = [[Beijing]]
| location     = [[Chaoyang District, Beijing]]
| hub          = [[Air China]], [[China Southern Airlines]]
| elevation-f  = 116
| elevation-m  = 35
| coordinates  = {{Coord|40|04|48|N|116|35|04|E|type:airport_region:CN|display=inline,title|name=Beijing Capital International Airport}}
| website      = {{URL|1=http://en.bcia.com.cn/|2=www.bcia.com.cn}}
| opened       = {{Start date|1958|03|02|mf=yes}}
| metric-rwy   = yes
| r1-number    = 18L/36R
| r1-length-m  = 3,800
| r1-length-f  = 12,467
| r1-surface   = [[Bitumen|Asphalt]]
| r2-number    = 18R/36L
| r2-length-m  = 3,200
| r2-length-f  = 10,499
| r2-surface   = Asphalt
}}

Example 3

File:Dfw airport.jpg
IATA: DFW ICAO: KDFW FAA LID: DFW
Summary
Airport type	Public
Owner	City of Dallas City of Fort Worth
Operator	DFW Airport Board
Serves	Dallas–Fort Worth
Opened	January 13, 1974 (1974-01-13)
Hub for	American Airlines, Envoy Air
Elevation AMSL	607 ft / 185 m
Coordinates	32°53′49″N 097°02′17″W
Website	www.dfwairport.com
Map
DFW is located in Texas DFW DFW Location within Texas
Runways
Direction Length Surface ft m 13L/31R 9,000 2,743 Concrete 13R/31L 9,301 2,835 Concrete 17C/35C 13,401 4,085 Concrete 17L/35R 8,500 2,591 Concrete 17R/35L 13,401 4,085 Concrete 18L/36R 13,400 4,084 Concrete 18R/36L 13,400 4,084 Concrete
Helipads
Number Length Surface ft m H1 158 48 Concrete
Statistics (2005)
Passengers 59,176,265 Aircraft operations 711,878 Metric tonnes of cargo 741,432
Sources: FAA, airport website.

Dallas–Fort Worth International Airport

{{Infobox airport
| name         = Dallas–Fort Worth International Airport
| image        = Dfw_airport.jpg
| IATA         = DFW
| ICAO         = KDFW
| FAA          = DFW
| type         = Public
| owner        = City of [[Dallas, Texas|Dallas]]
City of [[Fort Worth, Texas|Fort Worth]]
| operator     = DFW Airport Board
| city-served  = [[Dallas/Fort Worth Metroplex|Dallas/Fort Worth]]
| hub          = [[American Airlines]], [[American Eagle Airlines]]
| metric-elev  =
| elevation-f  = 607
| elevation-m  = 185
| website      = {{URL|http://www.dfwairport.com/}}
| opened       = {{Start date|1974|01|13|mf=yes}}
| coordinates  = {{coord|32|53|49|N|097|02|17|W|display=inline<!--- set here to prevent coordinates from appearing in the title of the template page --->}}
| pushpin_map            = USA Texas
| pushpin_map_caption    = Location within Texas
| pushpin_label          = DFW
| metric-rwy   =
| r1-number    = 13L/31R
| r1-length-f  = 9,000
| r1-length-m  = 2,743
| r1-surface   = [[Concrete]]
| r2-number    = 13R/31L
| r2-length-f  = 9,301
| r2-length-m  = 2,835
| r2-surface   = Concrete
| r3-number    = 17C/35C
| r3-length-f  = 13,401
| r3-length-m  = 4,085
| r3-surface   = Concrete
| r4-number    = 17L/35R
| r4-length-f  = 8,500
| r4-length-m  = 2,591
| r4-surface   = Concrete
| r5-number    = 17R/35L
| r5-length-f  = 13,401
| r5-length-m  = 4,085
| r5-surface   = Concrete
| r6-number    = 18L/36R
| r6-length-f  = 13,400
| r6-length-m  = 4,084
| r6-surface   = Concrete
| r7-number    = 18R/36L
| r7-length-f  = 13,400
| r7-length-m  = 4,084
| r7-surface   = Concrete
| h1-number    = H1
| h1-length-f  = 158
| h1-length-m  = 48
| h1-surface   = Concrete
| stat-year    = 2005
| stat1-header = Passengers
| stat1-data   = 59,176,265
| stat2-header = Aircraft operations
| stat2-data   = 711,878
| stat3-header = Metric tonnes of cargo
| stat3-data   = 741,432
| footnotes    = Sources: FAA<ref>{{FAA-airport|ID=DFW|use=PU|own=PU|site=23710.6*A}}</ref>, airport website<ref>[http://www.dfwairport.com/ Dallas–Fort Worth International Airport], official web site</ref>.
}}

Example 4

File:National Museum of the United States Air Force.jpg National Museum of the United States Air Force
IATA: FFO ICAO: KFFO FAA LID: FFO
Summary
Airport type	Military: Air Force Base
Operator	United States Air Force
Location	Dayton, Ohio
In use	1948 – present
Commander	Gen. Bruce Carlson – Air Force Materiel Command Brig. Gen. Bruce E. Davis –- 445th Airlift Wing Col. Colleen M. Ryan –- 88th Air Base Wing and Installation Commander
Elevation AMSL	823 ft / 251 m
Coordinates	39°49′34″N 084°02′54″W
Website	www.wpafb.af.mil
Map
Wright–Patterson AFB is located in Ohio Wright–Patterson AFB Wright–Patterson AFB Location within Ohio
Runways
Direction Length Surface ft m 5L/23R 12,601 3,841 PEM 5R/23L 7,000 2,134 Asphalt
Sources: FAA, official website.

Wright–Patterson Air Force Base

This infobox shows the use of an image and linked text over the blue background in title area. It also makes use of some of the fields used for military airports.

{{Infobox airport
| name         = Wright–Patterson Air Force Base
| ensign       = [[File:Air Force Materiel Command.png|100px]]
| nativename   = {{smaller|[[Air Force Materiel Command|{{black|Air Force Materiel Command}}]]}}
| image        = National Museum of the United States Air Force.jpg
| image_size   = 250
| caption      = [[National Museum of the United States Air Force]]
| IATA         = FFO
| ICAO         = KFFO
| FAA          = FFO
| type         = Military: [[Air Force Base]]
| operator     = [[United States Air Force]]
| location     = [[Dayton, Ohio]]
| built        = <!--1948-->
| used         = 1948 – present
| commander    = <div>
* Gen. Bruce Carlson – [[Air Force Materiel Command]]
* Brig. Gen. Bruce E. Davis – [[445th Airlift Wing]]
* Col. Colleen M. Ryan – [[88th Air Base Wing]] and Installation Commander
</div>
| occupants    =
| elevation-f  = 823
| elevation-m  = 251
| website      = {{URL|http://www.wpafb.af.mil/}}
| coordinates  = {{coord|39|49|34|N|084|02|54|W|display=inline<!--- set here to prevent coordinates from appearing in the title of the template page --->}}
| pushpin_map            = USA Ohio
| pushpin_map_caption    = Location within Ohio
| pushpin_label          = Wright–Patterson AFB
| r1-number    = 5L/23R
| r1-length-f  = 12,601
| r1-length-m  = 3,841
| r1-surface   = [[Porous European Mix|PEM]]
| r2-number    = 5R/23L
| r2-length-f  = 7,000
| r2-length-m  = 2,134
| r2-surface   = [[Bitumen|Asphalt]]
| footnotes    = Sources: FAA<ref>{{FAA-airport|ID=FFO|use=PR|own=MA|site=17827.*A}}</ref>, official website<ref>[http://www.wpafb.af.mil/ Wright-Patterson Air Force Base] (official site)</ref>.
}}

Example 5

IATA: BFV ICAO: VTUO
Summary
Airport type	Public
Serves	Buri Ram, Thailand
Elevation AMSL	590 ft / 180 m
Coordinates	15°13′46″N 103°15′04″E
Map
BFV is located in Thailand BFV BFV Location of airport in Thailand
Runways
Direction Length Surface m ft 04/22 2,100 6,890 Asphalt
Source: AIP Thailand

Buri Ram Airport

This infobox shows the use optional parameters for the location/pushpin map.

{{Infobox airport
| name         = Buri Ram Airport
| nativename-a = {{lang|th|ท่าอากาศยานบุรีรัมย์}}
| IATA         = BFV
| ICAO         = VTUO
| type         = Public
| city-served  = [[Buri Ram]], [[Thailand]]
| elevation-f  = 590
| coordinates  = {{coord|15|13|46|N|103|15|04|E|display=inline<!--- set here to prevent coordinates from appearing in the title of the template page --->}}
| pushpin_map            = Thailand
| pushpin_mapsize        = 220x300 <!--limit height to 300px-->
| pushpin_map_caption    = Location of airport in Thailand
| pushpin_image          = Thailand location map Topographic.png
| pushpin_label          = <span style="color:yellow; font-weight:bold; font-size:larger; text-shadow: black 0.1em 0.1em 0.2em">BFV</span>
| pushpin_label_position = bottom
| pushpin_mark           = Yellow_pog.svg
| pushpin_marksize       = 11
| metric-rwy   = y
| r1-number    = 04/22
| r1-length-m  = 2100
| r1-surface   = Asphalt
| footnotes    = Source: [[Aeronautical Information Publication|AIP]] Thailand<ref name="AIP">{{cite web | url = http://www.aisthai.go.th/webais/pdf/AERONAUTICALCHARTS/VTUO.pdf | title = VTUO &ndash; BURI RAM | format = [[PDF]] | publisher =  AIP Thailand | accessdate = 20 August 2012}}</ref>
}}

TemplateData

This is the TemplateData for this template used by TemplateWizard, VisualEditor and other tools. Click here to see a monthly parameter usage report for this template in articles based on this TemplateData.

TemplateData for Infobox airport

TemplateData

<templatedata> { "format": "Template:\n\n", "params": { "name": { "label": "Name", "type": "string", "required": false, "description": "The name of the airport in English", "default": "Infobox airport/doc" }, "nativename": { "label": "Nativename", "type": "string", "required": false, "description": "Airport name in a native language using Western characters (French, German, Spanish, etc.)" }, "nativename-a": { "label": "Nativename-a", "type": "string", "required": false, "description": "Airport name in a native language with non-Western characters (Chinese, Japanese, Korean, Arabic, etc.), such as ????????." }, "nativename-r": { "label": "Nativename-r", "type": "string", "required": false, "description": "Use in conjunction with above for Romanized name of the airport. In such cases the Romanized name should be in italics." }, "ensign": { "label": "Ensign", "type": "content", "required": false, "description": "A small ensign using image syntax.", "example": "File:Example.png" }, "image": { "label": "Image", "type": "wiki-file-name", "required": false, "description": "The name of image file, such as Airport.png or Logo.gif (do not include the File: or Image: prefix)." }, "image_size": { "label": "Image size or width", "aliases": ["image-width"], "type": "number", "required": false, "description": "The image size or width in pixels, e.g., 175 (defaults to 220 if not specified).", "example": "175", "default": "220" }, "image_alt": { "label": "Image alternative text", "type": "string", "required": false, "description": "Alternative text for the images." }, "caption": { "label": "Caption", "type": "string", "required": false, "description": "Text displayed beneath the image. If left blank or omitted, a caption will not be displayed. This should only be used for photographs that require an explanation; it should be omitted for airport logos and may be omitted for photographs." }, "image2": { "label": "Image2", "type": "wiki-page-name", "required": false, "description": "The name of image file, such as Airport.png or Logo.gif (do not include the File: or Image: prefix)." }, "image2_size": { "label": "Image2 size or width", "aliases": ["image2-width"], "type": "number", "required": false, "description": "The image size or width in pixels, e.g., 175 (defaults to 220 if not specified). This should only be used for smaller images which would appear distorted when expanded to a width of 220px.", "example": "175", "default": "220" }, "image2_alt": { "label": "Image2 alternative text", "type": "string", "required": false, "description": "Alternative text for the images." }, "caption2": { "label": "Caption2", "type": "string", "required": false, "description": "Text displayed beneath the image. If left blank or omitted, a caption will not be displayed. This should only be used for photographs that require an explanation; it should be omitted for airport logos and may be omitted for photographs." }, "IATA": { "label": "IATA", "type": "string", "required": false, "description": "The airport's three character IATA location identifier. If omitted or left blank it will display as IATA: none." }, "ICAO": { "label": "ICAO", "type": "string", "required": false, "description": "The airport's four character ICAO location identifier. If omitted or left blank it will display as ICAO: none." }, "FAA": { "label": "FAA", "type": "string", "required": false, "description": "The three or four character FAA location identifier for airports in the United States. If omitted or left blank, nothing is displayed." }, "TC": { "label": "TC", "type": "string", "required": false, "description": "The three or four character Transport Canada location identifier for airports in Canada. If omitted or left blank, nothing is displayed." }, "LID": { "label": "LID", "type": "string", "required": false, "description": "A location identifier for airports outside the US or Canada, if other than ICAO or IATA codes. If omitted or left blank, nothing is displayed." }, "GPS": { "label": "GPS", "type": "string", "required": false, "description": "A Global Positioning System code for the airport, if other than ICAO or IATA codes. If omitted or left blank, nothing is displayed." }, "WMO": { "label": "WMO", "type": "string", "required": false, "description": "The World Meteorological Organization five digit code for the weather station at the airport. If omitted or left blank, nothing is displayed." }, "type": { "label": "Type", "type": "string", "required": false, "description": "Airport type should be one of the following: Public, Private, Military or Military/Public. Do not use Commercial, General or Civil." }, "owner-oper": { "label": "Owner-Operator", "type": "string", "required": false, "description": "If the airport is owned and operated by the same entity, use this in place of owner and operator." }, "owner": { "label": "Owner", "type": "string", "required": false, "description": "Name of the airport owner." }, "operator": { "label": "Operator", "type": "string", "required": false, "description": "Name of the airport operator, if not the owner." }, "city-served": { "label": "city-served", "type": "string", "required": false, "description": "If the airport is associated with a major city but actually located in a smaller town, list the major city here and the smaller town under location. This is not automatically linked, in order to allow multiple links if needed.", "aliases": [ "area-served" ] }, "location": { "label": "Location", "type": "string", "required": false, "description": "Name of the town or city where the airport is located. Do not put the airport's street address in this field. This is not automatically linked, in order to allow multiple links if needed." }, "opened": { "label": "Opened", "type": "string", "required": false, "description": "The date when the airport originally opened for commercial service." }, "closed": { "label": "Closed", "type": "string", "required": false, "description": "The date when the airport closed, either temporarily or permanently, along with reason for closing (for presently closed airports only). Use  ()." }, "passenger_services_ceased": { "label": "Passenger Services Ceased", "type": "string", "required": false, "description": "The date when passenger services to the airport ceased due to conversion of the airport for another use, along with the new use for the airport. Only for airports that previously had passenger services. Use  ()." }, "hub": { "label": "Hub", "type": "string", "required": false, "description": "If the airport serves as an hub, list the airlines here. This is not automatically linked, in order to allow multiple links if needed. Use if the list is long." }, "focus_city": { "label": "Focus City", "type": "string", "required": false, "description": "If the airport serves as a focus city" }, "built": { "label": "Built", "type": "line", "required": false, "description": "The date when the structure was built, usually given in years." }, "used": { "label": "Used", "type": "string", "required": false, "description": "The period during which the structure was in active military use, usually given in years." }, "commander": { "label": "Commander", "type": "string", "required": false, "description": "The current commanding officer, for structures currently in military use." }, "occupants": { "label": "Occupants", "type": "string", "required": false, "description": "Any notable military units which occupy the structure." }, "timezone": { "label": "Timezone", "type": "number", "required": false, "description": "Will give the time zone that the airport is in, can be linked. A list can be found at List of time zones by country. Timezone is optional, but if it is used, then utc must be used as well, can be linked. A list can be found at List of UTC time offsets." }, "utc": { "label": "UTC", "type": "number", "required": false, "description": "UTC time of the airport" }, "summer": { "label": "Summer", "type": "string", "required": false, "description": "If the time zone observes daylight saving time this will give the zone that the airport is in, can be linked. A list can be found at List of time zones by country. " }, "utcs": { "label": "UTCS", "type": "string", "required": false, "description": "Summer is optional, but if it is used, then utcs must be used as well, can be linked. A list can be found at List of UTC time offsets." }, "elevation-f": { "label": "Elevation In Feet", "type": "number", "required": false, "description": "Height above mean sea level, in feet." }, "elevation-m": { "label": "Elevation In Metres", "type": "number", "required": false, "description": "Height above mean sea level, in metres." }, "metric-elev": { "label": "Metric-elevation", "type": "number", "required": false, "description": "Set to any value to display elevation in metric units (metres) before imperial/US units (feet); leave blank to display imperial/US units first." }, "coordinates": { "label": "Coordinates", "type": "number", "required": false, "description": "Latitude and Longitude of airport, specified using the template" }, "website": { "label": "Website", "type": "string", "required": false, "description": "External link to the airport's official website" }, "image_map": { "label": "Image Map", "type": "wiki-page-name", "required": false, "description": "The name of an image to use as a map, such as Airport_map.png (do not include the File: or Image: prefix)." }, "image_mapsize": { "label": "Image Mapsize", "type": "number", "required": false, "description": " The width to display the image map, in pixels. Just the number, no \"px\". If omitted or left empty, defaults to 220.", "default": "220" }, "image_map_alt": { "label": "Image Map Alternative", "type": "string", "required": false, "description": " Alt text for the image map. If left blank or omitted, this defaults to same text used in image_map_caption (or Location of {{{name}}} if no caption." }, "image_map_caption": { "label": "Image Map Caption", "type": "string", "required": false, "description": "Caption to display below the image map. If left blank or omitted, a caption will not be displayed." }, "pushpin_map": { "label": "Pushpin Map", "type": "string", "required": false, "description": "The name of a location map as per Template:Location map (e.g. Indonesia or Russia). The coordinates field position a pushpin mark and label on the map automatically." }, "pushpin_mapsize": { "label": "Pushpin Mapsize", "type": "number", "required": false, "description": " The width to display the pushpin map, in pixels. Just the number, without \"px\". If omitted or left empty, defaults to 220.", "default": "220" }, "pushpin_map_alt": { "label": "Pushpin Map Alternative", "type": "string", "required": false, "description": " Alt text for the pushpin map." }, "pushpin_map_caption": { "label": "Pushpin Map Caption", "type": "string", "required": false, "description": "Caption to display below the pushpin map. If left blank or omitted, a caption will not be displayed." }, "pushpin_relief": { "label": "Pushpin Relief", "type": "string", "required": false, "description": " Any non-blank value (yes, 1, etc.) will cause the template to display a relief map image, where available (see example 1). For additional information, see Template:Location map#Relief parameter." }, "pushpin_image": { "label": "Pushpin Image", "type": "wiki-page-name", "required": false, "description": " Name of an alternative map image, which must have the same edge coordinates as the location map template specified via pushpin_map" }, "pushpin_label": { "label": "Pushpin Label", "type": "string", "required": false, "description": "The text of the label to place next to the pushpin mark. The default is the value of the name parameter." }, "pushpin_label_position": { "label": "Pushpin Label Position", "type": "string", "required": false, "description": " The position of the label on the pushpin map relative to the pushpin mark (see example 5). Valid values are left, right, top and bottom. This defaults to either left or right, depending on the coordinates of the marker and its position relative to the right border of the map image." }, "pushpin_mark": { "label": "Pushpin Mark", "type": "string", "required": false, "description": "The name of an image to display as the pushpin mark.", "default": "Airplane silhouette.svg" }, "pushpin_marksize": { "label": "Pushpin Marksize", "type": "number", "required": false, "description": " The size of the mark in pixels" }, "r1-number": { "label": "r1-Number", "type": "number", "required": false, "description": "The designation of the runway, normally two numbers like this ? 02/20, 1st number is 18 lower than the 2nd. Where there are parallel runways an additional letter is added to each number, for example \"L\" for left, \"R\" for right and \"C\" for center. In certain cases a runway will only have one number when it can only be used in one direction. For airports in the United States the leading zero is not used and the designation should read 2/20." }, "r1-length-f": { "label": "r1-Length-In Feet", "type": "number", "required": false, "description": "Runway length in feet." }, "r1-length-m": { "label": "r1-Length-In Metres", "type": "number", "required": false, "description": "Runway length in metres." }, "r1-surface": { "label": "r1-Surface", "type": "string", "required": false, "description": "Runway surface type, such as: Concrete, Asphalt, Gravel, Grass (or Turf), Dirt, Water, etc. Avoid the generic type \"Paved\" if possible." }, "metric-rwy": { "label": "Metric-runway", "type": "string", "required": false, "description": "Set to any value to display runway length in metric units (metres) before imperial/US units (feet); leave blank to display imperial/US units first" }, "h1-number": { "label": "h1-Number", "type": "number", "required": false, "description": "The designation of the helipad. In the United States this is usually the letter \"H\" followed by a number, i.e. \"H1\", \"H2\", etc." }, "h1-length-f": { "label": "h1-Length-In Feet", "type": "number", "required": false, "description": "Helipad length in feet." }, "h1-length-m": { "label": "h1-Length-Metre", "type": "number", "required": false, "description": "Helipad length in metres." }, "h1-surface": { "label": "h1-Surface", "type": "string", "required": false, "description": "Helipad surface type, such as: Concrete, Asphalt, etc. Avoid the generic type \"Paved\" if possible." }, "stat1-header": { "label": "Stat1-Header", "type": "string", "required": false, "description": "A brief description of each statistic, such as Passengers or Aircraft operations." }, "stat1-data": { "label": "Stat1-Data", "type": "string", "required": false, "description": "The data associated with the corresponding header." }, "stat-year": { "label": "Stat-Year", "type": "line", "required": false, "description": "The calendar year for the statistics. This is displayed in parentheses after the word \"Statistics\" in the section header." }, "footnotes": { "label": "Footnotes", "type": "string", "required": false, "description": "The most common use for this field is to give sources or references for the data displayed in the infobox" } } } </templatedata>

Microformat

The HTML markup produced by this template includes an hCard microformat, which makes the place-name and location parsable by computers, either acting automatically to catalogue articles across Wikipedia, or via a browser tool operated by a person, to (for example) add the subject to an address book. Within the hCard is a Geo microformat, which additionally makes the coordinates (latitude & longitude) parsable, so that they can be, say, looked up on a map, or downloaded to a GPS unit. For more information about the use of microformats on Wikipedia, please see the microformat project.

Sub-templates

If the place or venue has "established", "founded", "opened" or similar dates, use {{start date}} for the earliest of those dates unless the date is before 1583 CE.

If it has a URL, use {{URL}}.

Please do not remove instances of these sub-templates.

Classes

hCard uses HTML classes including:

• adr
• agent
• category
• county-name
• extended-address
• fn
• label
• locality
• nickname
• note
• org
• region
• street-address
• uid
• url
• vcard

Geo is produced by calling {{coord}}, and uses HTML classes:

• geo
• latitude
• longitude

Please do not rename or remove these classes nor collapse nested elements which use them.

Precision

When giving coordinates, please use an appropriate level of precision. Do not use {{coord}}'s |name= parameter.

Tracking categories

• Category:Pages using infobox airport with unknown parameters (0)